Views
Difference between revisions of "Service Contracts/Maintenance Agreements"
From Appalachian State University Policy Manual
(→Revision Dates) |
|||
Line 1: | Line 1: | ||
Policy 509.17 | Policy 509.17 | ||
== Introduction == | == Introduction == | ||
− | |||
== Scope == | == Scope == | ||
Line 7: | Line 6: | ||
== Definitions == | == Definitions == | ||
− | |||
− | |||
− | |||
− | |||
== Policy and Procedure Statements == | == Policy and Procedure Statements == |
Revision as of 12:36, 5 October 2011
Policy 509.17
Contents
1 Introduction
2 Scope
3 Definitions
4 Policy and Procedure Statements
4.1 Service to Equipment
Most equipment generally requires some service to continue in operating condition. Therefore, it is often most economical to arrange for a service or maintenance contract with the manufacturer or service agency. The costs of service on the equipment must be borne by the using department and usually involves a service call charge, labor, and parts charges each time repair or maintenance is required. While parts and supplies are usually not covered in the service contract, the savings on service call and labor charges can make the lump sum payment for a service contract very reasonable.
4.2 Contract Initiation
A service or maintenance contract is initiated by submitting a procurement request to the Purchasing Office. Expendable parts are not usually covered under a maintenance agreement; therefore, a separate confirming procurement request must be issued and submitted to the Purchasing Office for charges not covered on the contract after service is performed
5 Additional References
6 Authority
7 Contact Information
8 Effective Date
9 Revision Dates
Last modified 04/08/2011 08:55:49 AM by Matt McNaney