Views
Difference between revisions of "Lockout/Tagout Procedures"
From Appalachian State University Policy Manual
(→Introduction) |
|||
| Line 1: | Line 1: | ||
Policy 303.14 | Policy 303.14 | ||
== Introduction == | == Introduction == | ||
| − | + | ||
| + | This procedure establishes the minimum requirements for the lockout and/or tagout of electrical disconnects, liquid, gas and steam valves, hydraulic/pneumatic systems or other energy sources. It shall be used to ensure that machines or equipment are stopped and isolated from all potentially hazardous energy sources, and locked out and/or tagged out before employees perform any servicing or maintenance activities where the unexpected start-up or release of stored energy could cause injury. | ||
== Scope == | == Scope == | ||
Revision as of 17:08, 9 June 2011
Policy 303.14
Contents
1 Introduction
This procedure establishes the minimum requirements for the lockout and/or tagout of electrical disconnects, liquid, gas and steam valves, hydraulic/pneumatic systems or other energy sources. It shall be used to ensure that machines or equipment are stopped and isolated from all potentially hazardous energy sources, and locked out and/or tagged out before employees perform any servicing or maintenance activities where the unexpected start-up or release of stored energy could cause injury.
2 Scope
3 Definitions
3.1 Definition phrase or word
- Definition summary
